How To Repair Apple Keyboard

Download Article

Download Article

Dell laptop keys are amid the nigh frustrating keys to work with. Withal, it is possible to repair many problems at home. Most professional repairs involve replacing the unabridged keyboard, then it'southward worth taking a few minutes to identify possible alternatives. If your laptop is still under warranty, contact Dell customer support for a possible free or reduced price repair.

1. one

   Plow off your computer. Unplug it every bit well. Repairing a keyboard is not unsafe, just it's always a good thought to take these precautions before you repair a computer.

2. two

   Remove the key cap. ^[1] Most loose keys should come abroad hands, with some gentle wiggling to unhook them from the retaining clip. If necessary, lever out the key cap from the corners with a flat caput screwdriver.

   Advertisement

3. 3

   Cheque the attachment points on the key. The base of the key cap should have up to four attachment points, where the cardinal clips onto the keyboard beneath. Wait closely for signs of a broken attachment. Proceed on to 1 of the steps below depending on what you see.

   • If y'all're not sure, remove a functional cardinal of the aforementioned size by gently levering out each corner with a screwdriver. Compare the attachment points on the ii keys.

4. iv

   Supersede a broken key cap. If the zipper points are broken, you lot volition need a new key.^[two] Buy i online, making sure it matches your laptop model and the location of the zipper points. To put in the new primal, hook i attachment point onto the keyboard, then rub your finger over the cardinal until you hear ii loud snaps, one at each end of the key.

   • Alternatively, remove a key of the same size that you rarely use. Place it in the former key's position.

5. v

   Fix the metallic bar on large keys. The space bar and ⇧ Shift keys are held flat by a metal bar. If this bar is non flat, you may need to re-attach it to the small plastic hooks on the keyboard. The bar should run along the lower end of the key, with the short arms of the bar running upwardly the left and right sides and onto the hooks. Once the bar is reattached, press the central cap over it and test it.

   • One time the bar is out of place, it oftentimes continues to have small issues or gets a tendency to sideslip out of place once again. Consider buying a replacement keyboard for your laptop, or having it repaired at a estimator repair store.
   • If you are installing a replacement for one of these keys, the replacement will come with its own bar. Remove the old bar first by gently levering it upward with a flat screwdriver.^[3]

6. 6

   Check for other problems. Loose keys are almost e'er caused by damage to the primal cap itself, or the metal bar of large keys. If you're sure the central cap is in good condition, read the section on stuck keys below. This covers damage due to spills, broken retaining clips, or a damaged membrane.

   Advertisement

1. ane

   Plough off and unplug your reckoner. This reduces the chance of damage to you and your computer.

2. 2

   Lever out the key with a screwdriver. Remove the stuck key with a small, apartment head screwdriver. Start past lifting each corner of the key, listening and feeling for a snap as it unhooks. Repeat with each corner until the key is removed, after two to four snaps.^[4]

   • Use light pressure level merely. If the key doesn't pop out, endeavor a dissimilar corner.
   • To remove larger keys, such as the Shift fundamental and Infinite bar, lever from the summit of the cardinal (the side nearest the laptop screen).

3. 3

   Look for dirt or small objects. ^[5] These can cause the key to stick. Remove modest objects with a pair of tweezers. Remove loose dust or animate being fur with compressed air or a gentle vacuum cleaner hose attachment.

4. 4

   Clean up spills. If you've spilled materials on the keyboard, remove the residue with a lint-free fabric. Dampen the cloth with a small amount of rubbing booze and wipe the sticky expanse gently. Leave the cardinal cap off until the rubbing alcohol has fully evaporated and the surface area is dry.^{[half dozen]}

5. 5

   Examine the retaining clip. The retaining clip, about often made out of white plastic, consists of two sparse, square objects hooked around each other. These should be firmly attached to the keyboard, and to each other. If they are non, remove the clip by gently twisting the corners free with a screwdriver. See below for detailed instructions on replacing them.

6. six

   Check the silicone rubber membrane. This nipple-shaped membrane sits beneath the heart of the fundamental. Confirm that it is standing up, and try to depress it with a very gentle touch from a clean, soft object. If it sticks in the down position instead of popping back upward, it needs cleaning or replacement.

   • Practice not touch it with a dingy or precipitous object. This part of the keyboard is hands damaged.
   • Clean with a lint-costless cloth dampened slightly with rubbing booze. Pat with extreme care and expect for it to dry.

7. vii

   Glue down a new membrane. Before you begin, realize that this is a risky fix, and could ruin the key if yous use besides much gum. For a more reliable repair, take the keyboard to a computer repair professional person to supervene upon the unabridged keyboard. If you do decide to endeavour this yourself, do then as follows:

   • Very carefully remove a membrane from a key you don't utilize by levering it off with a sharp knife.^[seven] It is very easy to impairment the membrane this way, but this is usually your only source of replacement membranes.
   • Use a toothpick to place a dab of potent glue, such as silicone adhesive, onto a sheet of paper.
   • Option upwards the membrane with tweezers and lower information technology onto the sheet of newspaper, then transfer it onto the keyboard.
   • Let sit for at to the lowest degree 30 minutes, or according to adhesive label instructions.
   • Reattach the servant and key cap on pinnacle of this, and permit sit another 20 minutes before using.

   Advertisement

1. 1

   Examine the pieces for breaks. The retaining clip is made out of 2 pieces. The larger foursquare or U shape fits onto the keyboard base and the central cap. The smaller piece, with a circular pigsty in the center, fits onto a small tab on the keyboard base. The two pieces fit together with 2 small tabs, one on either side of the smaller piece. If 1 of these pieces is missing or broken, order a replacement key or retaining clip for your exact keyboard model. If both pieces seem intact, go along to the adjacent step.

   • Earlier ordering a replacement key, make sure it includes a retaining prune. These are also sold as "hinges."
   • Alternatively, advisedly detach a clip from a key y'all don't apply as often, and reattach it to the broken central.
   • On some models, the tabs are carve up pieces. If they autumn out, you can slot them back in with a pair of tweezers.

2. 2

   Examine a nearby key. Even on the same keyboard, different retaining clips may be arranged in different way. Lift an next key cap the aforementioned size as the key y'all're replacing, by levering up the corners. Examine the exposed retaining clip as y'all repair the key. This will make it much easier to figure out how each slice slots in.

3. three

   Fit the larger piece onto the keyboard. On some models, you'll demand to squeeze the larger piece's sides in lodge to fit it into the slots on the keyboard base. Do this earlier attaching the two pieces together. Once attached to the keyboard base, you should be able to elevator the piece a short distance.

   • Simply one side of this piece attaches to the keyboard.

4. four

   Slot the smaller piece into the keyboard. Concord the smaller piece with the concave side facing downward — or feel the slice until you lot notice a groove, and go on that side face-down. Lower it onto the tabs on the keyboard base of operations until they hook onto the retentivity clip's groove.

5. v

   Fit the 2 pieces together. Await for the two pins on the side of the smaller clip. Gently press these into the sides of the larger clip, until the two pieces are attached.

   • Using too much force hither volition break your retaining clip.

6. 6

   Fit the cap back on. Claw the fundamental cap back over the retaining clip. Press down until you hear two snaps and the key remains firmly attached.

   Advertisement

Add together New Question

• Question

  What practice yous exercise when the keys on your laptop stop working?

  

  Mobile Kangaroo is a total service repair shop and Apple Authorized Service Provider headquartered in Mount View, CA. Mobile Kangaroo has been repairing electronic devices such as computers, phones, and tablets, for over 19 years, with locations in over 20 cities.

  

  Computer & Telephone Repair Specialists

  Expert Answer

• Question

  The number 2 key has the @ sign on the top, merely when I try to become the @ sign, a " is shown. How can this be corrected?

  

  Brand certain the language on your Windows Os is the same equally for the keyboard, or change the keyboard.

• Question

  I take a Dell Inspiron laptop and my numeric keys (simply 0-nine numbers) exercise not work, but the other keys are working properly - how do I resolve this problem?

  

  Starting time make sure your number lock ("NumLk") is off. If it is, you may demand to take it in for repairs.

• Question

  How practice I repair a faulty space bar?

  

  Carefully effort to have it out with a fundamental or scissors, and clean the contact part of the keyboard.

• Question

  I have to concur downwards every key on my keyboard for several seconds before it responds, any ideas?

  

  Check nether the keyboard for any dirt or crumbs that may exist stuck in between the keys and use short blasts with a spray duster to dislodge. Gently milk shake your laptop/keyboard from side to side to relieve stress under the keys. If this doesn't work, try getting special "Keyboard Slime" that you lot can mold and lay across the board. When it sets, it will choice up the dirt underneath the keyboard.

• Question

  My space bar doesn't work--it went down and I can't press information technology. What can I exercise?

  

  You should either endeavour to pry it upward, or you could keep pressing information technology with lots of force per unit area and it will pop upwards.

• Question

  My most-used keys however work, but the letters take worn off. How do I supplant them?

  

  Alexis Albright

  Customs Answer

  Y'all don't demand to supercede them. Depending on the colour, utilize a black or silverish Sharpie to neatly write on the key. If y'all don't know what key it is, look for the letter/number/symbol that is missing, or Google a keyboard and cheque the key layout.

• Question

  My key is tilted and so that when I press the key, I have to push very hard and sometimes information technology doesn't work. How would I set up that?

  

  You may have something lodged underneath the key, causing it to tilt. Use an air duster to endeavor and dislodge the item; if it doesn't work, you may have to remove the central, make clean underneath, and replace.

• Question

  Letter "s" key encompass is missing. Tried using another key. Alphabetic character still does not work. Whatever advice?

  

  You lot can remove the condom cup and come across if information technology works when yous press the keyboard membrane; if not, then you need to replace keyboard, as the circuit under keyboard membrane is bad.

• Question

  My F4, tab, caps lock and left shift buttons are not working. What should I exercise?

  

  When keys do non respond, you lot probable demand to supervene upon your keyboard. considering replacing the key won't set up this outcome. You tin remove the rubber cup and encounter if information technology works when you printing the keyboard membrane, and if not, and then yous need to replace the keyboard.

Come across more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advert

Video

• Use an extra-fine pigment pen or paint brush to re-letter a worn primal.

• In some repair guides, the retaining clip is referred to as a scissor support bar.

• If you have many keys missing, consider buying and installing an entirely new Dell keyboard. Make sure that you buy a keyboard that matches the exact make and model of your laptop.

• Get your laptop repaired past the retailer or manufacturer if it is even so under warranty with coverage for keyboard damage.

Advertisement

• Take extreme care when removing the membrane under the key. A damaged membrane is much harder to prepare than just a damaged primal.

• Trying to fix your laptop yourself may void your warranty. If you are not sure that you'll be able to fix it yourself, or feel that the gamble is too high, consider hiring a laptop repair professional. If your laptop is still under warranty, contact Dell customer service.

Advertizing

Things You'll Need

• Laptop
• Small flat head screwdriver
• Tweezers
• Sharp knife
• Replacement key, retaining prune, or membrane, if original is broken or lost
• Strong adhesive

About This Article

Cheers to all authors for creating a page that has been read 322,126 times.

Is this article upwardly to date?

Source: https://www.wikihow.com/Repair-Dell-Laptop-Keyboard-Keys

Posted by: herbertxylaw1937.blogspot.com

Share this post